What’s Included

Provided Materials


  • 2”x4” Western Red Cedar floor joists
  • ¾” Pressure-treated plywood subfloor
  • Nine prefabricated wall panels
  • Four exterior corner moldings
  • Three prefabricated roof panels
  • Metal roof package with peel-and-stick underlay
  • Roof fascia and soffit
  • Cedar deck boards pre-stained
  • Two cedar privacy walls pre-stained
  • Two cedar towel racks pre-stained
  • Prehung cedar door with glass insert pre-stained


  • Two prefabricated cedar floor panels with protective wax coating
  • Prefabricated upper and lower bench with protective wax coating
  • Prefacribated backrest with protective wax coating – black
  • Clear cedar finishing trim


  • LED strip lighting preinstalled under the upper and lower benches
  • LED lighting driver
  • Bluetooth receiver and dimmable remote for LED strip lighting
  • PVC weatherproof box
  • Harvia Cilindor 9 KW electric sauna stove
  • 4 boxes of 10-15mm sauna rocks


We include every single piece of hardware you need to install ANGA!

Required Tools

  • Finishing Hammer
  • Tape Measure
  • Pencil
  • Utility Knife
  • Driver Drill
  • Two Step Ladders (one to access the roof 92” above ground)
  • Paint Brush
  • Hand Saw
  • Quick clamp (recommended but not required)
  • Chop Saw (recommended but not required)
  • 18 Gauge Brad Nailer (recommended but not required)


Every piece of the sauna kit comes pre-assembled, pre-cut, and pre-drilled except for the interior finishing trim pieces. We highly recommend using a chop saw (mitre saw) to cut the trim pieces and an 18 gauge brad nailer to secure them. If you do not have access to either of these tools you can use a hand saw to cut the trim and a finishing hammer to install them.